FEATURES

Improves filtration
Sludge/varnish prevention
Optional HR pump/motor
Flow rates to 20+ gpm
Agglomerates small particles into filterable size
Removal of ferrous and non-ferrous contaminant
Improves water and air separability

Download Datasheets
(in pdf)

LR CMU AgglomeratorTM

HR CMU AgglomeratorTM

MR CMU AgglomeratorTM coming soon.

LR CMU
AgglomeratorTM


HR CMU
AgglomeratorTM
Read the AgglomeratorTM press release.

LR CMU SPECIFICATIONS
Flow Rate
 35 to 150 gph (133 to 568 lph)
Dimensions
 12.5 in x 10in x 4.2in
(31.8 cm x 25.4 cm x 10.7 cm)
Max. Fluid Pressure
 300 PSIG (20 Bar)
Fluid Pressure Drop
 25 PSID (1.7 Bar)
Fluid Temperature* 40 to 200˚F (4.4 to 93˚C)
Fluid Viscosity*
 2 to 220 cSt @ 40˚C
Fluid Flash Point
 >140˚F (60˚C)
HR CMU SPECIFICATIONS
Flow Rate
 600 to 1200 gph (2300 to 4500 lph)
Dimensions
(no pump)
 57in x 22in x 18in
(145cm x 56cm x 46cm)
Dimensions
(with pump)
 58in x 34in x 26in
(173cm x 86cm x 66cm)
*Contact an ISOPur representative for operation outside of recommended ranges.
Purification 101: Fluid contamination analysis targets the primary cause of wear and lubricant failure forming the central strategy of a proactive maintenance program.
- Noria Corp.

ISOPur Fluid Technologies, Inc. 185 South Broad Street, Pawcatuck, CT 06079
info@isopurfluid.com ph: 860.571.8590 fax: 860.571.8815
2003-2006 Copyright. ISOPur and Balanced Charge Agglomeration are trademarks of ISOPur Fluid Technologies, Inc. ISOPur reserves the right to change specifications without notice.